If you miss assigning a Private IP to your VM during the creation you can still do so after the fact.
1. Right click on Select the VM and select PropertiesVM Details.
2. Click on the Under Hardware tab , scroll to the NICs section and click on the Add Edit button.
From EDIT you can change current adapter settings or add a new adapter
3. Choose Organization VDC network and click Next.
4. Select your network and click Finish.
5. Your Network will now be attached. You can define the IP address you want to assign with Static - Manual in IP Mode or leave it as IP Pool.
That's it. Don't forget to configure that IP inside your Virtual Machine (Guest OS level).Add New Adapter
Complete the following under NEW or Current Adapter
- Primary Nic ( If there is more than 1 adapter, select your preference )
- Connected ( Connected to the Network )
- Adapter Type ( Depending on the OS )
- Network ( Network Located in the vApp that you want the VM to be connected to )
- IP Mode ( Depending on what you want to do but will mostly be under Static IP Pool or Static Manual )
