Step 1. Deploy a VM
...
Existing Version | Upgrade Path |
|---|---|
9.5 (Out of support) | Upgrade to 9.7 U4 P3 |
9.7 U4 P3 (Legacy) | Upgrade to 9.7 U4 P3, then migrate to 10.0 U2 P2 |
10.0 U2 P2 | Upgrade to 10.0 U4 P2 |
10.0 U4 P2 | No upgrade required |
...
VMware | Hyper-V | |
|---|---|---|
Zerto 10.0 U2 P1 | ||
Zerto 9.7 (Legacy) | ||
Zerto Migration Utility Tool | ||
Zerto v10 U4 P2 Offline Upgrade Bundle | ||
Installing the Software
NOTE: If you are more than one major version away from the supported version you will need to perform a stepped upgrade to get to the latest version. Refer to “Upgrade Path” above.
...
If you have the following time out issue when trying to pair to the site, Please make sure your local firewall device has not issue of passing packets with MTU size 1500 through the IPsec VPN tunnel. You can verify that by pinging the ZCC IP with command “ping -M do -s 1472 xx.xx.xx.xx“ from your local ZVM.
”pairing to site failed, timed out after attempting to connect to peer for 20 seconds”
Step 13. Setup Replication
...